Flashing the Turris Omnia
=========================

From factory to ROOter
----------------------

- Copy the 'tar.gz' file with 'omnia-medkit' in its name to the root of a
USB flash drive formatted with FAT32.

- Disconnect other USB devices from the Omnia and connect the flash drive to either USB port.

- With the Omnia powered up press and hold the rear reset button. The front LEDs will start to light up in a sequence.
When 4 LEDs are lit, regardless of the color, release the reset button.

- Wait approximately 2 minutes for the Turris Omnia to flash itself with the temporary image, during which time
the LEDs will change multiple times.

After the router has finished flashing point your browser to 192.168.1.1 and you will see the ROOter web GUI.

Do not bother setting the password as it will not be needed. Instead, browse to System->Backup/Flash Firmware.

Uncheck the 'Keep Settings' box and use the 'Choose File' button to select the 'turris-omnia-upgrade.img.gz' file.

Click the 'Flash Image' button and then select 'Proceed' in the following page.

Wait for the router to flash to the permanent ROOter image. When the LEDs have settled down browse to 192.168.1.1
and enter the ROOter web GUI.

